MYSTIC: Michigan Young STar Imager at CHARA

We present the design for MYSTIC, the Michigan Young STar Imager at CHARA. MYSTIC will be a K-band, cryogenic, 6-beam combiner for the Georgia State University CHARA telescope array. The design follows the image-plane combination scheme of the MIRC instrument where single-mode fibers bring starlight into a non-redundant fringe pattern to feed a spectrograph. Beams will be injected in polarization-maintaining fibers outside the cryogenic dewar and then be transported through a vacuum feedthrough into the ~220K cold volume where combination is achieved and the light is dispersed. We will use a C-RED One camera (First Light Imaging) based on the eAPD SAPHIRA detector to allow for near-photon-counting performance. We also intend to support a 4-telescope mode using a leftover integrated optics component designed for the VLTI-GRAVITY experiment, allowing better sensitivity for the faintest targets. Our primary science driver motivation is to image disks around young stars in order to better understand planet formation and how forming planets might influence disk structures.Comment: Presented at the 2018 SPIE Astronomical Telescopes + Instrumentation, Austin, Texas, US

Integrated optics for astronomical interferometry - VI. Coupling the light of the VLTI in K band

Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stability of a few percent. Even if a dispersive phase is present, we show that it does not bias the measured Fourier visibility estimate. An upper limit of 0.005 for the cross-talk between linear polarization states has been measured. We take advantage of the intrinsic contrast stability to test a new astronomical prodecure for calibrating diameters of simple stars by simultaneously fitting the instrumental contrast and the apparent stellar diameters. This method reaches an accuracy with diameter errors of the order of previous ones but without the need of an already known calibrator. These results are an important step of integrated optics and paves the road to incoming imaging interferometer projects

The planar optics phase sensor: a study for the VLTI 2nd generation fringe tracker

In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2[SUP]nd[/SUP] Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design

VITRUV - Imaging close environments of stars and galaxies with the VLTI at milli-arcsec resolution

The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program.Comment: In "The Power of Optical/IR Interferometry: Recent Scientific Results and 2nd Generation VLTI Instrumentation", Allemagne (2005) in pres

Increasing the imaging capabilities of the VLTI using integrated optics

Several scientific topics linked to the observation of extended structures around astrophysical sources (dust torus around AGN, disks around young stars, envelopes around AGBs) require imaging capability with milli-arcsecond spatial resolution. The current VLTI instruments, AMBER and MIDI, will provide in the coming months the required high angular resolution, yet without actual imaging. As a rule of thumb, the image quality accessible with an optical interferometer is directly related to the number of telescopes used simultaneously: the more the apertures, the better and the faster the reconstruction of the image. We propose an instrument concept to achieve interferometric combination of N telescopes (4 ≤ N ≤ 8) thanks to planar optics technology: 4 x 8-m telescopes in the short term and/or 8 x 1.8-m telescopes in the long term. The foreseen image reconstruction quality in the visible and/or in the near infrared will be equivalent to the one achieved with millimeter radio interferometers. Achievable spatial resolution will be better than the one foreseen with ALMA. This instrument would be able to acquire routinely 1 mas resolution images. A 13 to 20 magnitude sensitivity in spectral ranges from 0.6 to 2.5 μm is expected depending on the choice of the phase referencing guide source. High dynamic range, even on faint objects, is achievable thanks to the high accuracy provided by integrated optics for visibility amplitude and phase measurements. Based on recent validations of integrated optics presented here an imaging instrument concept can be proposed. The results obtained using the VLTI facilities give a demonstration of the potential of the proposed technique

VSI: a milli-arcsec spectro-imager for the VLTI

VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral resolution of: a) the close environments of young stars probing the initial conditions for planet formation; b) the surfaces of stars; c) the environment of evolved stars, stellar remnants and stellar winds, and d) the central region of active galactic nuclei and supermassive black holes. The science cases allowed us to specify the astrophysical requirements of the instrument and to define the necessary studies of the science group for phase A.Comment: 12 page

Increasing the imaging capabilities of the VLTI using integrated optics

Several scientific topics linked to the observation of extended structures around astrophysical sources (dust torus around AGN, disks around young stars, envelopes around AGBs) require imaging capability with milli-arcsecond spatial resolution. The current VLTI instruments, AMBER and MIDI, will provide in the coming months the required high angular resolution, yet without actual imaging. As a rule of thumb, the image quality accessible with an optical interferometer is directly related to the number of telescopes used simultaneously: the more the apertures, the better and the faster the reconstruction of the image. We propose an instrument concept to achieve interferometric combination of N telescopes (4 ≤ N ≤ 8) thanks to planar optics technology: 4 x 8-m telescopes in the short term and/or 8 x 1.8-m telescopes in the long term. The foreseen image reconstruction quality in the visible and/or in the near infrared will be equivalent to the one achieved with millimeter radio interferometers. Achievable spatial resolution will be better than the one foreseen with ALMA. This instrument would be able to acquire routinely 1 mas resolution images. A 13 to 20 magnitude sensitivity in spectral ranges from 0.6 to 2.5 μm is expected depending on the choice of the phase referencing guide source. High dynamic range, even on faint objects, is achievable thanks to the high accuracy provided by integrated optics for visibility amplitude and phase measurements. Based on recent validations of integrated optics presented here an imaging instrument concept can be proposed. The results obtained using the VLTI facilities give a demonstration of the potential of the proposed technique

GRAVITY: observing the universe in motion

GRAVITY is the second generation VeryLarge Telescope Interferometer instrument for precision narrow-angle as -trometry and interferometric imaging.With its fibre-fed integrated optics,wavefront sensors, fringe tracker, beamstabilisation and a novel metrologyconcept, GRAVITY will push the sensitivity and accuracy of astrometry andinterferometric imaging far beyond whatis offered today. Providing precisionastrometry of order 10 microarcseconds,and imaging with 4-milliarcsecondresolution, GRAVITY will revolutionisedynamical measurements of celestialobjects: it will probe physics close tothe event horizon of the Galactic Centreblack hole; unambiguously detect andmeasure the masses of black holesin massive star clusters throughout theMilky Way; uncover the details of massaccretion and jets in young stellarobjects and active galactic nuclei; andprobe the motion of binary stars, exoplanets and young stellar discs. Theinstrument capabilities of GRAVITY areoutlined and the science opportunitiesthat will open up are summarised

The MAORY laser guide star wavefront sensor: design status

MAORY will be the multi-adaptive optics module feeding the high resolution camera and spectrograph MICADO at the Extremely Large Telescope (ELT) first light. In order to ensure high and homogeneous image quality over the MICADO field of view and high sky coverage, the baseline is to operate wavefront sensing using six Sodium Laser Guide Stars. The Laser Guide Star Wavefront Sensor (LGS WFS) is the MAORY sub-system devoted to real-time measurement of the high order wavefront distortions. In this paper we describe the MAORY LGS WFS current design, including opto-mechanics, trade-offs and possible future improvements